Frequently Asked Questions

How to weatherproof cable?

This FAQ suitable for: N44PI/N48PI/N46PIN441Y/N481Y


You can use connector to connect camera to  ethernet cable. Below are methods.

 

1. Put the rubber gasket inside of endcap.

 

2. Put the O-type gasket in camera's ethernet port. If there is a O-type gasket already on ethernet port, you can skip this step.

 

3. Cut off RJ45 lead on ethernet cable.

4. Put the ethernet cable inside of lock nut. Please don't put lock nut in wrong direction.

 

5. Put the endcap with rubber gasket into ethernet cable. Tighten endcap with lock nut.

 

6.Install the RJ45 connector.

 

7. Plug ethernet cable into camera's RJ45 port.

 

 

8. Finally, fasten endcap.

 

Last update:
2018-06-21 11:11
Author:
LeiTian
Revision:
1.6
Average rating: 1 (1 Vote)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Most popular FAQs

  1.   How to connect DVR/NVR on phone app xmeye? (274753 views,Published at 2017-04-04 07:51)
  2.   How to connect DVR/NVR on computer browser? (217439 views,Published at 2017-03-16 09:59)
  3.   How to set up email alerts? (138135 views,Published at 2017-08-25 10:04)
  4.   Where to find the serial number and QR code ... (128219 views,Published at 2017-03-30 04:02)
  5.   How to install a hard disk drive? (122305 views,Published at 2016-11-30 05:42)
  6.   What to do if DVR or NVR can't connect ... (117849 views,Published at 2015-12-23 09:26)
  7.   How to setup motion detection recording? (97834 views,Published at 2016-05-31 05:43)
  8.   What to do if you forget camera's password? (90050 views,Published at 2015-09-18 05:12)
  9.   What to do if phone or computer can't connect ... (89496 views,Published at 2017-02-20 03:22)
  10.   How long can 1TB hard drive record? (89205 views,Published at 2017-04-03 05:34)